Flow Control and Fluid Transfer 

Fluids are divided into five types they are: Ideal fluids Real fluids Newtonian fluids Non-Newtonian fluids Ideal plastic fluids Ideal Fluids: An ideal fluid is defined as a fluid which is in-compressible and the one that does not have viscosity. Ideal fluids are imaginary fluids. This exist some viscosity. Real Fluids: A real fluid is defined as a fluid which

Carburetor is a device which blends the air and fuel mixture for an internal combustion engine. Components of carburetor The components present in the carburetor are float chamber, diaphragm chamber, venture, throttle, idle and off idle circuits, main circuit etc. Float chamber: Float chamber is used to holds the fuel at the atmospheric pressure and needs to be ready for

Pressure regulator is a mechanical device, which does not require any external source. It acts as a valve, at certain pressures and is used to break the flow of liquid or gas automatically. Mainly the regulators are used to allow the fluids with high pressure supply to the tanks and lines. This is used to reduce the pressure safety and

Centrifugal pumps are the sub class of the turbo machinery of dynamic axisymmetric type that is work absorbing. These pumps are used to transport the fluids by a rotational kinetic energy process of conversion into the hydrodynamic energy of the fluid flow. The energy of rotational is typically from an electric motor or an engine.  These are most preferred hydraulic

Stainless steel is an alloy of steel and little percentage of chromium. The chromium addition enhances the corrosive property to steel. Its maintenance is very easy with resistance to oxidation. These metals do not affect other metals in contact and used very often in larger number of applications. Tubing and piping manufactory are included in these applications. These pipes are

Valves Valve is a mechanical device used to control the flow direction of the fluid (liquid, solids, gases, fluidizers, slurries) and pressure in a system. In the open valves system the direction of the fluid is always passes from high pressure to low pressure. Types of the valves: Check valve, Hydraulic valve, Pneumatic valve, Manual valve, Solenoid valve, Motor valve,

Valves Valve is a mechanical device used to control the flow direction of the fluid (liquid, solids, gases, fluidizers, slurries) and pressure in a system. In the open valves system the direction of the fluid is always passes from high pressure to low pressure. The pressure flow and fluid flow mainly depends on the following functions Starting and stopping flow